Vet Small Fragment Instruments Set, S.S., Vet Small Fragment Instruments Set, S.S. Manufacturer, Vet Small Fragment Instruments Set, S.S. Suppliers, Small Fragment Sets

Vet Small Fragment Instruments Set, S.S.

VAS011M Vet Small Fragment Instruments Set, S.S.
Set Consisting of :	Units
V260.250 - Drill Bit 2.5mm Dia V260.250 - Drill Bit 2.5mm Dia	2
V260.350 - Drill Bit 3.5mm Dia V260.350 - Drill Bit 3.5mm Dia Code No. Dia. in mm Length in mm V260.200 2.0 100 V260.251 2.5 130 V260.320 3.2 130 V260.350 3.5 130	2
V305.020 - Counter Sink for 3.5, 4.0mm Screws (6.0mm Head) V305.020 - Counter Sink for 3.5, 4.0mm Screws (6.0mm Head)	1
V264.025 - Tap of 3.5mm Cortex Screw V264.025 - Tap of 3.5mm Cortex Screw Code No. Dia. in mm Length in mm V264.020 2.7 Cortex V264.025 3.5 Cortex V264.030 3.5 Cancellous V264.038 4.0 Cancellous	2
V264.038 -Tap of 4.0mm Cancellous Screw V264.038 - Tap of 4.0mm Cancellous Screw Code No. Dia. in mm Length in mm V264.020 2.7 Cortex V264.025 3.5 Cortex V264.030 3.5 Cancellous V264.038 4.0 Cancellous	2
V306.010 - Quick Coupling Handle (T-Type) V306.010 - Quick Coupling Handle (T-Type)	1
V307.060 - Drill & Tap Sleeve Combined 3.5/2.5mm V307.060 - Drill & Tap Sleeve Combined 3.5/2.5mm	1
V307.090 - Insert Drill Sleeve 2.5mm / 3.5mm V307.090 - Insert Drill Sleeve 2.5mm / 3.5mm	1
V301.060 - Screw Driver Shaft, Q.C. End - 2.5mm Tip V301.060 - Screw Driver Shaft, Q.C. End - 2.5mm Tip	1
V301.040 - Small Hexagonal Screw Driver 2.5mm Tip V301.040 - Small Hexagonal Screw Driver 2.5mm Tip	1
V303.010 - Depth Gauge Small V303.010 - Depth Gauge Small	1
V371.000 - Sharp Hook V371.000 - Sharp Hook	1
V302.010 - Small Plate Bender for Plates 2.7 & 3.5mm V302.010 - Small Plate Bender for Plates 2.7 & 3.5mm	1
V340.020 - Self Centering Bone Holding Forceps- 190mm V340.020 - Self Centering Bone Holding Forceps- 190mm	1
V379.015 - Hohman Retractors, Small, 8mm Wide, 160mm V379.015 - Hohman Retractors, Small, 8mm Wide, 160mm	2
V381.012 - Periosteal Elevator, Straight/Curved 12mm V381.012 - Periosteal Elevator, Straight/Curved 12mm	1
V379.020 - Hohman Retractors, 15mm Wide, 160mm V379.020 - Hohman Retractors, 15mm Wide, 160mm	2
V341.025 - Reduction Forceps, Serrated - 140mm V341.025 - Reduction Forceps, Serrated - 140mm	1
V342.035 - Reduction Forceps, Pointed - 140mm V342.035 - Reduction Forceps, Pointed - 140mm	1
V304.010 - Neutral and Loaded Drill Guide (Small) V304.010 - Neutral and Loaded Drill Guide (Small)	1
V900.029 - Empty Container	1
Vet Optional Instruments for Small Fragments
V263.020 - Bone Tap with T-Handle V263.020 - Bone Tap with T-Handle Code No. Dia. in mm Length in mm V263.020 2.7 Cortex V263.025 3.5 Cortex V263.030 3.5 Cancellous V263.038 4.0 Cancellous
V261.620 - Drill Bit - Plain Shank / Jacob Chuck End V261.620 - Drill Bit - Plain Shank / Jacob Chuck End Code No. Dia. in mm Length in mm V261.620 2.0 100 V261.626 2.5 130 V261.632 3.2 130 V261.635 3.5 130 Other sizes are available under General Instruments
V305.059 - Counter Sink, Quick Coupling for 3.5, 4.0mm Screws (6.0mm Head) V305.059 - Counter Sink, Quick Coupling for 3.5, 4.0mm Screws (6.0mm Head)
V306.020 - Quick Coupling Fibre Handle with Rotation V306.020 - Quick Coupling Fibre Handle with Rotation
V306.030 - Quick Coupling Adaptor with Jacob End for Drill Machine V306.030 - Quick Coupling Adaptor with Jacob End for Drill Machine
V301.010 - Lane Screw Driver V301.010 - Lane Screw Driver
V301.021 - Hexagonal Screw Driver with Screw Holding Sleeve, 2.5mm Tip (Excel) V301.021 - Hexagonal Screw Driver with Screw Holding Sleeve, 2.5mm Tip (Excel)
V307.020 - Drill Sleeve 2.5mm V307.020 - Drill Sleeve 2.5mm
V302.070 - Plate Bending Press V302.070 - Plate Bending Press
V310.020 - Hollow Mill for Removal of Screws Medium - for 3.5mm Screws V310.020 - Hollow Mill for Removal of Screws Medium - for 3.5mm Screws
V302.040 - Plate Bender for 2.7mm & 3.5mm reconstruction Plates V302.040 - Plate Bender for 2.7mm & 3.5mm reconstruction Plates
V310.010 - Hollow Mill for Removal of Drill Bits V310.010 - Hollow Mill for Removal of Drill Bits
V309.000 - Screw Holding Forceps V309.000 - Screw Holding Forceps
V302.071 - Plate Bender for Small Fragment Plates V302.071 - Plate Bender for Small Fragment Plates

Vet Small Fragment Instruments Set, S.S.

V260.250 - Drill Bit 2.5mm Dia

V260.350 - Drill Bit 3.5mm Dia

V305.020 - Counter Sink for 3.5, 4.0mm Screws (6.0mm Head)

V264.025 - Tap of 3.5mm Cortex Screw

V264.038 - Tap of 4.0mm Cancellous Screw

V306.010 - Quick Coupling Handle (T-Type)

V307.060 - Drill & Tap Sleeve Combined 3.5/2.5mm

V307.090 - Insert Drill Sleeve 2.5mm / 3.5mm

V301.060 - Screw Driver Shaft, Q.C. End - 2.5mm Tip

V301.040 - Small Hexagonal Screw Driver 2.5mm Tip

V303.010 - Depth Gauge Small

V371.000 - Sharp Hook

V302.010 - Small Plate Bender for Plates 2.7 & 3.5mm

V340.020 - Self Centering Bone Holding Forceps- 190mm

V379.015 - Hohman Retractors, Small, 8mm Wide, 160mm

V381.012 - Periosteal Elevator, Straight/Curved 12mm

V379.020 - Hohman Retractors, 15mm Wide, 160mm

V341.025 - Reduction Forceps, Serrated - 140mm

V342.035 - Reduction Forceps, Pointed - 140mm

V304.010 - Neutral and Loaded Drill Guide (Small)

V263.020 - Bone Tap with T-Handle

V261.620 - Drill Bit - Plain Shank / Jacob Chuck End

V305.059 - Counter Sink, Quick Coupling for 3.5, 4.0mm Screws (6.0mm Head)

V306.020 - Quick Coupling Fibre Handle with Rotation

V306.030 - Quick Coupling Adaptor with Jacob End for Drill Machine

V301.010 - Lane Screw Driver

V301.021 - Hexagonal Screw Driver with Screw Holding Sleeve, 2.5mm Tip (Excel)

V307.020 - Drill Sleeve 2.5mm

V302.070 - Plate Bending Press

V310.020 - Hollow Mill for Removal of Screws Medium - for 3.5mm Screws

V302.040 - Plate Bender for 2.7mm & 3.5mm reconstruction Plates

V310.010 - Hollow Mill for Removal of Drill Bits

V309.000 - Screw Holding Forceps

V302.071 - Plate Bender for Small Fragment Plates

Quality

Associate Sites

More

Connect With Us